Поръчай по телефон

0879 971 671

 

Google Translate
**** ПАЗАРУВАЙ НА ИЗПЛАЩАНЕ С TBI PAY! ****

Вземи на изплащане стоката, която желаеш, веднага! Получаваш одобрение от 15 мин. до 2 часа, за срок от 3 до 36 месеца и за суми от 100 до 10 000 лв. За повече подробности виж линка по-долу!

Audio-Technica AT2035

Audio-Technica AT2035
 
Код на продукт: AT2035
Наличност: В наличност
Цена: 420.00лв.
К-во:  
Кредитен модул TBI Bank 19.68

Само за 43.89 лв. на месец

Fixed-charge back plate, permanently polarized condenser microphone

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Includes custom shock mount & protective pouch


Specifications
Resources
Related Products

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Weight: 403 g (14.2 oz)
Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Напишете ревю

Вашето име:


Вашият коментар: Note: HTML is not translated!

Оценка: Лош           Добър

Въведете кода в полето отдолу:



Подобни продукти